BFPPW - D-703 DEVELOPER (SEE SUPPL DATA)
- MSDS: BFPPW
- Manufacturer: MET L CHEK COMPANY
- Product Name: D-703 DEVELOPER (SEE SUPPL DATA)
- National Stock Number: 6850-00-782-2740
Product Identification
Product ID:D-703 DEVELOPER (SEE SUPPL DATA)
MSDS Date:10/21/1986
FSC:6850
NIIN:00-782-2740
Kit Part:Y
MSDS Number: BFPPW
Responsible Party
SANTA MONICA, CA 90404-3770
US
Emergency Phone: 213-450-1111
Info Phone: 213-450-1111
Cage: 98733
Contractor
Telephone: 310-450-1111/FAX 310452-4046
Cage: 98733
Ingredients
METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
OSHA PEL 350 PPM/450 STEL
ACGIH TLV: 350 PPM/450STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ISOBUTANE/PROPANE MIXTURE (AS PROPELLANT)
OSHA PEL 1000PPM(PROPANE)
ACGIH TLV: ASPHYXIANT (PROPANE)
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE MILD IRRITATION TO SKIN &
RESP TRACT SYSTEM
Effects of Overexposure:INHAATION CAUSE IRRITATION TO NOSE AND
RESPIRATORY SYSTEM.EARLY TO MODERATE CNS DEPRESSION MAY BE
EVIDENCED BY DIZZ,GIDDINESS,HEADACHE,NAUSEA;EYES:VAPOR MAY CAUSE
IRRITATION;SKIN:LIQUID CONTACT MAY IR RATATE MILDLY;INGESTION:MAY
CAUSE IRRITATION TO MOUTH & GI TRACT.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN,EYE,AND
RESPIRATORY DISORDERS MAY BE AGGRAVATED.
First Aid
First Aid:INHALATION:REMOVE TO FRESH AIR.GIVE CPR IF
NEEDED;EYES/SKIN:FLUSH WITH RUNNING WATER FOR ATLEAST 15
MINUTES.GET MEDICAL HELP IF IRRITATION OCCURS OR PERSISTS;
INGESTION:GIVE LG QTY OF WATER.DO NOT IND UCE VOMITING.NOTHING BY
MOUTH IF UNCONSCIOUS GET MEDICAL ATTENTION.
Fire Fighting
Flash Point:N/R (AEROSOLS)
Lower Limits:2.0 (LIQ)
Upper Limits:15.0 (LIQ)
Extinguishing Media:WATER FOG,"ALCOHOL" FOAM,DRY CHEMICAL OR CO*2
Fire Fighting Procedures:CONTAINERS EXPOSED TO INTENSE HEAT FROM FIRES
SHOULD BE COOLED WITH WATER SPRAY TO PREVENT VAPORS PRESSURE
BUILD-UP.DON T STORE ABOVE 120F.
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY RUPTURE/EXPOSED DUE TO
VAPOR PRESSURE BUILD IF EXPOSE TO INTENSE HEAT.
Accidental Release
Spill Release Procedures:ELIMINATE IGNITION SOURCES.WEAR PROTECTV
CLOTHING & APPROPRIATE RESPIRATOR.SOAKUP RESIDUE WITH ABSORBENT
CLAY,SAND,EARTH, OR OTHER MATERIAL.PLACE RAGS & ABSORBED WASTE AND
DAMAGED BUT EMPTY CANS IN DO T COVERED NON-LEAKING CONTAINERS.
Handling
Handling and Storage Precautions:STORE AWAY FROM HOT PLACES & IGNITION
SOURCES.DO NOT STORE OR HANDLE IN ALUMINUM EQUIPMENT AT TEMP ABOVE
120F.
Other Precautions:DURING TRANSFER OF LIQUID IN BULK,GROUND THE HANDLING
EQUIPMENT
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR IF EXPOSURE TLV
LIMITS.
Ventilation:PER MFR,MECHANICAL(GEN) OR LOCAL EXHAUST TO MAINTAIN TLV OR
REDUCE VAPORS.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:GOGGLES
Other Protective Equipment:EYE WASH FOUNTAINS AND SAFETY SHOWERS.
Work Hygienic Practices:WASH WITH SOAP & WATER BEFORE
EATING,DRINKING,SMOKING OR USING TOILET FACILITIES
Supplemental Safety and Health
NSN OF 3 PARTS KIT UNDER TYPE I,METH C, LEVEL 3 OF MIL-I-25135,REV
D;KIT CONSISTS OF PENETRANT,DEVELOPER,& REMOVER;I/A/W
QPL-25135-15,THE MET-L-CHEK KIT MAY HAVE (1)FP-95,FP-98,OR FP-99
PENETRANT,(2) R-501 REMOVER,& (3) D-701 OR D-703
DEVELOPER;KEY1:J7;THIS ENTRY DESCRIBES:D-703 DEVELOPER.
Chemical Properties
HCC:V3
Spec Gravity:1.30-1.32(BULK)
Evaporation Rate & Reference:0.35 OF LIQ(ETHER=1.0)
Solubility in Water:APPRECIATE
Appearance and Odor:LIQUID BEFORE FILLING IN AEROSOL CANS IS MILKY
WHITE LIQ WITH ETHER-LIKE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS,CAUSTIC SODA,CASUTIC POTASH.
Stability Condition to Avoid:HEAT,SPARKS,IGNITION SOURCES
Hazardous Decomposition Products:CARBON MONOXIDE & UNIDENTIFIED ORGANIC
COMPOUNDS,HYDROGEN CHLORIDE & TRACES OF PHOSGENS.
Disposal
Waste Disposal Methods:DISPOSE OF AS EPA HAZARDOUS WASTE MANAGEMENT
FACILITIES.EMPTY AEROSOL CAN BEFORE DISPOSING OF THEM.PRESSURIZED
AEROSOL CANS ARE NOT ACCEPTABLE WASTE.COMPLY ALL FEDERAL,STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.